How to Take Harley Out of Transport Mode

If your Harley-Davidson motorcycle is new, it will likely come in transport mode. This means that the engine management system has been configured to limit power and speed, which is necessary when the bike is being shipped. You can take the bike out of transport mode by following a few simple steps.

Start by putting the key in the ignition and turning it to the “On” position. Next, press and hold the reset button on the odometer for five seconds. Finally, turn the key off and then back on again.

Once you have completed these steps, your Harley should be out of transport mode and ready to ride!

  • Park the motorcycle on a level surface and turn off the engine
  • Remove the key from the ignition and set it aside
  • Press and hold the odometer reset button while turning on the ignition switch with the left-hand control lever in the “Off” position
  • Continue to hold down the odometer reset button until “Diag” appears on the display screen, then release it
  • Scroll through the diagnostic menu by pressing and releasing the odometer reset button until you see “Tran Adj
  • ” Highlighted on the screen, then press and hold it for three seconds to enter the transport mode adjustment mode
  • 6a) Use the left-hand control lever to scroll through options 1-5 until “Tran Adjustment” is highlighted, then press and hold the odometer reset button for three seconds to enter that menu; or 6b)Scroll through options 1-5 until “All Tran Adj
How to Take Harley Out of Transport Mode
How to Take Harley Out of Transport Mode

How Do I Turn off Transport Mode?

If you’re using an iPhone and want to turn off transport mode, there are a few things you need to do. First, open the Settings app and tap on “Cellular.” Next, scroll down to the bottom of the page and tap on “Transport Mode.”

Finally, toggle the switch next to “Transport Mode” to OFF.

What is Harley Transport Mode?

Harley transport mode is a feature that allows you to move your motorcycle without starting the engine. This can be useful if you need to move your bike short distances, such as into a garage or onto a trailer. To use Harley transport mode, simply put the bike in neutral and engage the parking brake.

Then, push down on the hand grip shift lever to disengage the clutch. Finally, push the start button on the handlebar to activate transport mode. The cluster will display “T” for transport mode and the headlight will stay on as long as the button is pressed.

When you’re ready to move your motorcycle, just release the start button and roll it wherever you need to go. Be sure to set the parking brake before stopping, or else your bike may roll away!

How Do You Turn on Transport Mode on a Harley?

Assuming you would like tips on how to enable transport mode on a Harley-Davidson motorcycle: Before loading your bike onto a trailer or into the back of a truck, it’s important to know how to properly engage transport mode. This will not only prevent damage to your motorcycle but also make the process go more smoothly overall.

Here are some tips on how to do just that: First and foremost, find an appropriate location to park your bike before engaging in transport mode. Once you’ve found a spot, put your kickstand down and ensure that the surface is level so that your bike won’t topple over while in transport mode.

Next, disengage the clutch by pulling in the lever located on the left handlebar. At the same time, press down on the shift pedal with your left foot until you hear/feel a click. This lets you know that you’ve shifted into first gear.

If your motorcycle has a security system, now would be the time to engage it so that no one can start up and ride off with your bike while it’s in transit. With the clutch still disengaged, use your right hand to twist the throttle all the way open and then release it quickly–this should cause the engine revs to increase briefly. As they do, quickly close the throttle again.

Doing this causes what’s known as “throttle blipping,” which helps synchronize engine speed with wheel speed and prevents gears from grinding when shifting–something that could potentially damage your transmission if not done correctly (or at all).

Now slowly let out on the clutch lever until you feel resistance–this is where you want to keep it throughout transport mode so that there’s no unnecessary wear and tear on your clutch plates.

At this point, give yourself enough gas (twist the throttle open) so that the engine doesn’t stall out–you may need to experiment a bit here to find just the right amount of gas for each particular situation/motorcycle model since they can vary quite a bit.

And finally, turn off any accessories such as heated grips or Bluetooth speakers so as not to draw power unnecessarily while in transit mode.

What Happens If You Don’t Put Your Harley in Transport Mode?

If you don’t put your Harley in transport mode, the bike can become damaged while being transported. This is because the bike isn’t secured properly and can move around, making contact with other objects which can cause scratches or dents. In addition, not putting your Harley in transport mode voids any warranty that may be in place, so it’s important to follow the proper steps in order to avoid any issues.

How to Turn off Harley Alarm With Fob

Few things are more frustrating than having your motorcycle alarm go off when you don’t want it to. If you have a Harley-Davidson with an alarm system, here’s how you can turn it off using the fob. First, find the alarm system’s brain, which is typically located under the seat.

Once you’ve found it, locate the main power wire and disconnect it. This will disable the alarm system. Next, locate the siren and remove it from its mounting location.

Once it’s removed, disconnect the two wires that connect it to the bike’s electrical system. With the siren out of commission, your Harley’s alarm system should be disabled. If you ever need to re-enable it, simply reconnect the main power wire and reinstall the siren.

2022 Sportster ‘S Transport Mode

2022 Sportster ‘S Transport Mode If you’re looking for a way to move your sportbike around without all the hassle, look no further than the new 2022 Sportster ‘S Transport Mode. This innovative new feature allows you to easily and quickly attach your bike to a trailer or other vehicle, so you can get where you’re going without any fuss.

Here’s how it works: first, you’ll need to purchase the optional Transport Mode kit, which includes everything you need to get started. Once you have the kit, simply follow the instructions to attach your bike to the included frame. Then, when you’re ready to hit the road, just load up your bike onto the trailer or other vehicle, and away you go!

The best part about Transport Mode is that it doesn’t require any special skills or knowledge – anyone can do it! So whether you’re transporting your bike for a cross-country trip or just want an easy way to get it from point A to point B, Sportster ‘S Transport Mode has you covered.

How to Put a 2019 Harley in Transport Mode

Assuming you would like a blog post discussing how to put a 2019 Harley in transport mode: “How to Put a 2019 Harley in Transport Mode” If you’re planning on transporting your 2019 Harley, you’ll need to know how to properly put it in transport mode.

This is necessary in order to avoid any damage while the motorcycle is being transported. Here’s a step-by-step guide on how to do it: First, park your Harley on level ground and turn off the ignition.

Next, locate the transport mode switch – it’s usually located near the left handlebar. Once you’ve found it, push and hold the switch for about five seconds until the status light comes on. Now that your Harley is in transport mode, you can safely load it onto a trailer or truck for transport.

Just be sure to secure it properly so that it doesn’t move around during transit. And that’s all there is to put your 2019 Harley into transport mode!


If you’ve just bought a new Harley, you’re probably eager to take it out for a spin. But before you can hit the open road, you need to take your Harley out of transport mode. This is a simple process that anyone can do, and it only takes a few minutes.


Spread the love

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *