How To Install A Utility Sink Next To Washer

Do you want to increase the space in your garage or laundry using only one utility sink?  A utility sink saves both water and time on one line, so why not install a utility sink?  If you want to install it, you need to know how to install a utility sink next to the washer.

You can install a sink and washer using just one pipeline.  This will require proper guidelines.  We will try to explain the whole process to you in this article.  Hopefully, you will try to hold your attention.  So, let’s get started.

What is a utility sink?

A utility sink is also called a laundry sink.  A utility sink is a type of sink that is used for deep cleaning.  This type of sink is usually found in laundry and washing shops.  People who use paintbrush or clothes wash use this type of sink.

Utility sinks are used for washing or dipping things and may often reach a depth of 15 to 25 inches. A utility sink: Is it worthwhile? No doubt. Your task will be much facilitated by a utility sink. You may simply remove stains from your garments with this utilitarian sink if any hue of blood or wine comes on them. With a typical washing machine, this is impossible.

 

What do I need before performing the process?

There are a few basic things you can do to help ease the way.  This will make it easier for you to work and save your time.  We are giving a list of necessary things in this section:

•  Wrench
•  PVC Y-fitting Pipe
•  Plumber’s guide
•  Two brash
•  Measuring stick

Also, keep a collection of things you need to work on.  This will make your work faster and better.  In the next step, we will learn about the complete guideline.

 

How To Install A Utility Sink Next To Washer

If you want to install a utility sink next to your washer, you need to know the right rules.  If you want to set up the utility sink & washer separately, it will require a lot of time and space.  Notice the method below if you want to connect two things together in one line.

Step 01: Measure the size of the drain.

First, you need to measure the size of the drain, because you need to collect the necessary pipes.  Take an accurate measure of the drain.  Then collect as many pipes as you need.  Turn off the main water supply while measuring.  This will prevent unintended accidents and you will be able to work better.

Steps 02: Cut all the pipes

Since you are going to set up everything in a new way, cut off all the old pipes.  Especially cut the T-fitting pipes because we have to set up the Y-fitting pipes here.  However, those that already have Y-fitting need not be cut.

Step 03: Replace T-fitting with Y-fitting pipe

Cut all the pipes of T-fitting and connect the pipes of Y-fitting.  Connect one part of the Y-fitting to the washer, another part to the sink, and the last part to the main source.  Then adjust with the power of the main source.

Steps 04: Strengthen using glue

Then glue the joints well using good quality glue so that water does not leak out.  Take a good look at this issue.  Definitely try to use good brand glue.  It is more likely to get good results.

Step 05: Check the main water supply

Check if the water supply is OK and if everything seems OK.  Then limit the water speed a little so that the water flow does not increase suddenly.  If the water level suddenly rises, there is a possibility of joint rupture.  So keep this in mind.

You can do this very easily if you take a good look at the above 5 steps.  This will not require a plumber.

 

Safety Tips

It is important to be careful before doing anything.  A little carelessness can lead to a lot of damage.  So be sure to protect yourself.  Here are some safety tips in this section:

• You must turn off the main water supply before working, otherwise, the water may overflow and flood.
• Be careful when working with the wrench or the pipe may burst.
• Use good quality glue or the pipe may burst in the water source.
• Leave unnecessary pipes for later work.
• Try to keep a line of washer and sink.

 Try to adhere to all the above safely.  So that no accident happens.

 

How much does it cost to add a sink to a laundry room?

If you do not want to do it yourself, you can hire a plumbing worker.  However, it may require a little more budget.  If you have no problem with your budget, you can hire them.

You need more than luck to succeed in affiliate business.  However, the amount of the budget depends on the country.  It can cost $ 700- $ 1,000 if you are a Canadian or USA resident.  It can be more or less, it depends on the plumbing company. There are also some things that are very important to know.  Such as the amount of pipe required, the quality of the pipe, and the number of plumbing members.

But try to hire a mid-level worker.  As good as they are, your money will be saved. Also, try to buy good quality pipes that will last a long time otherwise you will have to spend money again.  So keep this in mind.

 

Final word

If you own a laundry or washer shop, you need to know a sink installation method.  There is a lot of misinformation given online so it is difficult to get accurate information.  In this article, we have discussed how to install a utility sink next to the washer without any hassle.

Hopefully, you have already mastered the whole process.  If you still have more questions, don’t forget to mail us.  Let us know in the comments if you know anything new.  Thank you for being with us.